Contaminants Multi-Pure Removes
|
|
What specific contaminants are Multi-Pure Drinking Water Systems certified by NSF to reduce?
NSF® has tested and certified
Multi-Pure® Drinking Water Systems to reduce the contaminants listed
below to within the limitations set by the established standards (note
that the maximum rate of reduction that NSF® will certify is 99%).
Contaminants limits set by NSF/ANSI Standard 42 (Aesthetic Effects):
- Chloramine
- Chlorine
- Particulate matter, Class I (0.5 to < 1 micron)
Contaminants limits set by NSF/ANSI Standard 53 (Health Effects):
- Arsenic V (only the Multi-Pure® MP880 series and MP750PlusRO systems are certified to reduce Arsenic V)
- Asbestos
- Chlordane
- Cyst (Giardia, Cryptosporidium, Entamoeba, Toxoplasma)
- Lead (pH 6.5, pH 8.5)
- Mercury (pH 6.5, pH 8.5)
- MTBE
- PCB (Polychlorinated biphenyls)
- Toxaphene
- Turbidity
- VOC (Volatile Organic Chemicals):
- Alachlor
- Atrazine
- Benzene
- Carbofuran
- Carbon Tetrachloride
- Chlorobenzene
- Chloropicrin
- 2,4-D
- Dibromochloropropane
- o-Dichlorobenzene
- p-Dichlorobenzene
- 1,2-Dichloroethane
- 1,1-Dichloroethylene
- cis-1,2-Dichloroethylene
- trans-1,2-Dichloroethylene
- 1,2 Dichloropropane
- cis-1,3-Dichloropropylene
- Dinoseb
- Endrin
- Ethylbenzene
- Ethylene Dibromide (EDB)
- Haloacetonitriles (HAN):
- Bromochloroacetonitrile
- Dibromoacetonitrile
- Dichloroacetonitrile
- Trichloroacetonitrile
- Haloketones (HK):
- 1,1-dichloro-2-propanone
- 1,1,1-trichloro-2-propanone
- Heptachlor
- Heptachlor Epoxide
- Hexachlorobutadiene
- Hexachlorocyclopentadiene
- Lindane
- Methoxychlor
- Pentachlorophenol
- Simazine
- Styrene
- 1,1,2,2-Tetrachloroethane
- Tetrachloroethylene
- Toluene
- 2,4,5-TP (Silvex)
- Tribromoacetic acid
- 1,2,4-Trichlorobenzene
- 1,1,1-Trichloroethane
- 1,1,2-Trichloroethane
- Trichloroethylene
- Trihalomethanes (TTHM):
- Chloroform (surrogate chemical)
- Bromoform
- Bromodichloromethane
- Dibromochloromethane
- Xylenes (total)
|